Epoxy Flake flooring to Garage
Our team recently completed a high-quality epoxy flake flooring installation for a residential garage. The project began with diamond grinding the concrete surface to ensure optimal adhesion. We carried out epoxy mortar repairs to address any cracks and imperfections, preparing a even base for the coating. The Naroo Epoxy Flake Flooring system was then applied,…
PU Flooring over existing tiles
PU Flooring application process To begin the PU Flooring application process, the team began by diamond grinding the existing tiled surface to remove any contaminants and prepare it for the new coating. This process covered an area of 73m², ensuring the surface was clean and properly prepared for adhesion. To ensure a strong bond between…
Concrete Crack Repairs and Concrete Coatings
Professional concrete repairs with durable concrete coating The team began by diamond grinding and “V”-shaping the crack locations along approximately 370 linear meters, following the guidelines provided in the supplied Crack Map. This step ensured proper crack preparation for repair. Once the cracks were shaped, they were irrigated with Epigen 0489 neat epoxy resin. The…
KBS Cable Coating & Structural Chartek Fireproofing
KBS Cable Coating All cables were manually cleaned to remove any dirt, dust, or contaminants to ensure proper adhesion of the fireproof coating. Surrounding areas were carefully masked and protected to prevent any overspray from affecting nearby surfaces during the application process. Cable identification markings were taped off to ensure they remained clear and unaffected…
Polyurethane Cement Flooring with Coving
Applying Polyurethane Cement Flooring with Coving. The floor areas, totalling 778m², were diamond ground to prepare the surface for coating. Delineation cuts were made along all perimeters and around drain locations to provide clear boundaries and ensure proper bonding of the coatings at these critical areas. Aluminium arrowhead profiles were mechanically fixed to all walls…
Roy Hill – KBS Cable Coating
KBS Cable Coating All cables were manually cleaned to remove any dirt, dust, or contaminants to ensure proper adhesion of the fireproof coating. Surrounding areas were carefully masked and protected to prevent any overspray from affecting nearby surfaces during the application process. Cable identification markings were taped off to ensure they remained clear and unaffected…
Concrete Cancer Repairs
Concrete repairs to return the area back to its original structural strength and to protect any exposed reinforcement steel to prevent corrosion. A thorough tap test was conducted across the entire affected concrete surface to identify areas of delamination. The repair areas were carefully measured and marked. The boundaries were clearly defined to ensure the…
Basement Waterproofing
Supply and install waterproofing membrane to basement floor and walls. The Grace Products Preprufe 300R membrane was supplied and installed onto the floor and sump blinding layer, covering a total area of 295m². This self-adhesive membrane was carefully applied to ensure a strong, waterproof bond with the substrate, preventing any potential water infiltration. All wall…
